DataVideo STC-100 Ficha de datos

STC-100 Standards Converter User’s Guide http:// www.datavideo-tek.com Rev: 240106

9 Rear Panel Connections Power In Socket and On / Off Switch Connect the supplied power adaptor to the DC Input socket. Once the plug has been inse

10Color Processor The built in color processor is very easy to use. The memory is non-volatile, so settings are saved, even when the STC-100 is power

11To increase the contrast, press the + button. Repeated presses of the + button will gradually increase the contrast. Once set as required, press t

12Specification Input Video: CVBS, S-Video, YUV input Audio: RCA (Phono)-Unbalanced (Stereo) Output Video: CVBS, S(Y/C), YUV, Black Burst output Audi

13 P/N: 082060382E2 All the trademarks are the properties of their respective owners. Datavideo Technologies Co.,

1Warnings and Precautions 1. Read all of these warnings and save them for later reference. 2. Follow all warnings and instructions marked on this u

2Service and Support It is our goal to make your products ownership a satisfying experience. Our supporting staff is available to assist you in setti

3Warranty Datavideo warrants that the equipment it manufactures shall be free from defects in material and workmanship for a period of 12 months fro

4 Contents INTRODUCTION 5 WHAT’S IN THE PACKAGE 5 CONNECTION DIAGRAM 6 FRONT PANEL 7 REAR PANEL CONNECTION 8 COLOR PROCESSOR 10FACTORY RES

5Introduction The Datavideo STC-100 is a high quality bi-directional standards converter. It can convert NTSC to PAL – PAL to NTSC from Component (YU

6Connection diagram： There are many possible combinations of connections to and from the STC-100. In this example a Component (YUV) PAL video signal

7Front Panel Input Select YUV / S(Y/C) / CV (Composite) Select the video input format that you intend to use. The button of the selected input will

8 0 IRE / 7.5 IRE The black level output for NTSC can be set to 0 or 7.5 IRE. For North American NTSC use 7.5, for Japanese NTSC use 0. If the butto